This post has been pending for a long while, I finished rebuilding my home server in May. It went pretty smoothly but there were some hiccups along the way, some doubt in the products I had bought and so on.
All turned good in the end though.
The setup is as follows:
- Fractal Design Array R2 Mini ITX Case
- Gigabyte GA-H67-USB3-B3
- Intel Core i3 2100T 2.5GHz
- 4GB of DDR3 RAM
- 4 x 2TB Samsung HD204UI
- 2 x 1TB Samsung HD103SJ
- 3Ware 9650SE-4LPML Storage Controller
- Windows Home Server 2011
The build went pretty smoothly as I’ve already mentioned, the biggest upheaval was the realisation that the exact model of 2TB drive I had bought from Samsung had a firmware problem causing data loss in some specific circumstances, bad times! So I had to flash the 4 brand new drives before the build could start.
From here the build was smooth, motherboard, cpu, memory, and storage controller in to the case everything looked good. Then when mounting the drives I noticed a problem, the storage controller would touch the bottom of the drive chassis just a no more. Worried about shorting something or causing some other damage I insulated the edge of the storage controller with some electrical tape.
Hardware all built it was time to configure, the plan was 2 x 1TB drives in a RAID 1 set using the motherboards built in storage controller, this would be the system drive and host client backups (2 PCs and 1 Mac), and 4 x 2TB drives in a RAID 5 set using the 3Ware storage controller for the main file shares.
Partitions were therefore setup as follows:
- 60GB system partition
- 871GB for client backups
- 5.45TB for file shares
OS install took about an hour, some config changes needed to be made to move the backups to the partition I wanted, and the media shares to the largest partition. Once this was done it was time to start copying data, it took a couple of days to complete and that was it. I ran the WHS connector installer on all clients running into another problem, it wouldn’t install on my MacBook Pro (it still won’t but that’s an aside they’ve not updated it for Lion yet).
And that’s it. I’ve been running it now since completion with problems occurring only once when I think it had overheated which brings me back to what I said at the beginning about doubt in the products I had bought.
Specifically the Fractal Design case. Once ordered I started worrying about airflow and heat, the drives are tightly packed together and there’s only one case fan on the rear so it was a real concern. I am still watching it closely using SpeedFan but so far so good.